The irrigation filter system is specially designed for center pivots. The mesh number and size all meet standard international requirements. Finely crafted in our workshop, the drip irrigation filter is galvanized with ASTM A 123/123m-02 and leaving no residual dross.
The spiral shell structure makes the water irrigation filter more solid. Each steel part of Rainfine’s pivot is hot-dip galvanized and meet U.S. standards of ASTM A 123/123m-02.
The sprinkler filter is also convenient and easy to maintain. Just take out the screen and clean off any sediment before replacing it back on.
Technical Parameters of Irrigation FilterModel | GPM | m3/hr | A | B | C | D | E | Below Off Outlet | Weight | Gate Flush Valve |
|
275 | 62.45 | 68 | 4 | 6% | 6 | 54 | 1" | 70 | 1" |
|
475 | 107.87 | 70 | 6 | 12 | 6 | 53 | 2" | 120 | 2" |
|
700 | 158.97 | 77 | 8 | 14 | 6 | 59 | 2 1/2" | 170 | 2 1/2" |
|
1200 | 272.52 | 130.5 | 8 - 10 | 14 | 6 | 112 | 2 1/2" | 230 | 2 1/2" |
|
2000 | 454.20 | 139.8 | 12 | 16 | 6 | 119 3/4 | 4" | 360 | 4" |